Replacement Nissan Key Fob
With advanced encryption and radio frequency, Nissan smart keys provide extra security against theft. These technologies are powered by an internal battery that will eventually weaken and may require replacement.
Replacing a key fob's battery is a simple process. Fortunately, the vetted technicians and specialists in parts at Boch Nissan are ready to help!
Battery
The Nissan key fob is a vital component. It allows you to unlock your doors and start your car and perform other functions. If it isn't working it is likely that you want to know what the issue is. You can fix the issue by simply replacing the battery.
A new CR2032 battery is available in a hardware or discount grocery store for a low price. Also, you'll need a small screwdriver to remove the back of your key fob. You can use a screwdriver in order to separate the two halves on most models. After you have opened the key fob, take off the battery and replace it with the new one. Make sure the new battery is aligned correctly.
Depending on the model of your Nissan it is possible that you need to confirm that the new battery is the right one for your model. This information is typically found in the owner's guide or on the backside of the fob for the key. Once you've gotten the right battery, plug it into the fob, then snap the cover back shut, and test it to make sure it's working. G28 Car Keys offers a variety of helpful videos that can assist you in finding a solution to any issue. If you need assistance, you can contact your Nissan dealer in Farmington Hills.
Programming
Modern Nissan vehicles are equipped with a keyfob that offers greater convenience and functions than traditional manual keys. Unfortunately, they may be more susceptible to battery issues and require replacement as time passes. This is a simple fix that you can do at home.
The first step in the process is to take out the old battery. To do this, locate an elongated catch on the back of the keyfob and pull it downwards. This will release the mechanical key that serves as an emergency starters. This is something you will want to have on hand and return to after the replacement has been completed.
After removing the old battery, record the location and the way it was placed. You will need to use a flat-head screwdriver to lift the battery off. Replace the battery you have used with the new one. Make sure that the side facing upwards is facing downwards. Reassemble the outer case and test it to make sure that everything is working correctly.
You should now be in a position to start your car by pressing any button on your fob. You can also test the connection by pressing any button in your car's dashboard. Contact the service center of Boch Nissan South for assistance if you have any questions about your Nissan vehicle or require assistance.
Locks
The Nissan Intelligent Key is designed to lock the car and open the trunk by the click of a button. If it stops working even after a programming and replacement of the battery the fob, there could be a second issue to be considered. In some cases a fob that's damaged may require a replacement component or repairs to the circuit board in order to function normally. Water, blunt force or scratches on the board can cause damage to the board.
A professional will inspect your Intelligent Key to determine if it is damaged and determine if it will require repairs or an upgrade. In some cases, the problem may be repaired with a simple and inexpensive fix. For more serious problems, the key may need to be replaced.
The replacement of the battery inside your Nissan's key fob can take just a few minutes. However, this procedure involves touching sensitive and fragile electronic components, so it is recommended to always wear a pair of gloves (preferably latex) or a non-latex alternative. You'll also require flathead drivers as well as a new CR2032 battery.
To change the battery, begin by entering your vehicle, and making sure that all of the doors are closed and locked. Then you can press the unlock button on the key fob 6 to 10 times. After that take out and insert your ignition key, but don't turn it to start the vehicle. You will see the hazard lights flash two times, which means that your Nissan is in programming mode.
Keyless Entry
We have positive news for you if you think your key fob does nothing other than unlock and lock your vehicle. Some modern fobs are able to open your windows, or even start the engine when you tap your keys at the rear bumper.
In contrast to the traditional key, that has only three locks, these newer systems are based on RFID technology. The key fob is armed with a microchip which has a unique frequency. This enables it to communicate with the car's receiver and open the doors or trunk. The majority of models will recognize you when you enter the car with the key fob and then automatically unlock it.
Certain models let you open the trunk by wiggle your keys behind the car. This can be extremely useful for those with hands full of luggage or groceries. The key fob also has a button that will allow you to start your car by pressing it on the steering wheel. This feature is activated when you press the clutch or brake when you press the START/STOP buttons.
If you're having trouble getting into your Nissan to do some errands or go out for a night out near Troy, your key fob's battery might be dead. To fix this, flip the fob over and push the small release latch to the back. You've successfully programmed your replacement Nissan fob if you can see both the lock and unlock light flashing.